HDRiG Video Microphone for Interview Vlogging Audio Recording

With the integrated 1/4"-20 threaded screw mount, thisCombination could conveniently hold up your accessory to shelves, plate glass, desktop and more.

The Articulating Arm is a flexible arm that supports 2kg for attaching and positioning available accessories to your camera or accessory mounting point.

Product Highlight • 12G BNC male to female SDI protector isolation cable  • Passing Through 2K • Anti-burn protector cable for ARRI Mini / RED Komodo • Prevents current breakdown SDI protection device • Cable length : 28cm   Product Description • Function: We installed a circuit board chip in the shell to protect the SDI output. By isolating the current from the BNC male connector to the BNC female connector, the same transmission effect can be achieved through the same frequency. Prevent the current passing through the SDI line from breaking down the machine SDI. Such accidents are very common in ARRI mini and Komodo. Net Weight: 59 g   Package Included: 1 × 12G BNC SDI Protector SDI Anti-current Isolation Cable For ARRI Mini / RED Komodo Cameras (Blue) 1 × 1/4"-20 Screw

The HDRIG ARRI Rosette handgrip comes with M6 male screw connection, array of 1/4"-20 & 3/8"-16 mounting points allows to attach additional accessories.

This cable features a right-angle D-Tap connector on one end and RED-compatible LEMO connector on the other and allows you to power your RED DSMC2 Camera using any external battery.

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

Product Description • Blue power supply coiled cable for on-camera monitors (universal use) • Plug A: 2-port D tap male • Plug B: right angle DC 2.5mm with lock • Straightened length: 100cm  • Cable material: aluminum  • Condition: brand new, fully tested before shipping  Net Weight: 43.4 g   Package Included: 1 * Universal Monitor Power Supply Coiled Cable D Tap To DC 2.5mm Right Angle With Lock (Blue)

Product Highlights • Easync sync timecode cable for Sony FS7  • Plug A: right angle 3.5mm mini jack • Plug B: 3 pin XLR male • Cable length: 53cm   Product Description • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping. Please contact us if the cable you received is defective or doesn't work. we'll solve the problem properly or send you a new replacement at once.  Net Weight: 48.8 g   Package Included: 1 x Easync Sync Timecode Cable For Sony FS7 XLR 3 Pin Male To Angled 3.5mm Mini Jack