HDRiG Camera Hand Grip Stabilizer For Vloggers

The Handle Grip Stabilizer comes with a split ring, which enables you to carry the handgrip along with you conveniently.

The grip is made from a solid aluminum alloy. It comes with a 2-in-1 Rod Clamp Converter that can adjust the comfortable position at any time.

This is a setup including a T-bar and a ball head, there come two 1/4" female to 5/8"male screws which can mount two microphones on both ends at the same time.

This universal base mount square block comes with 1/4"-20 thread hole in the center and a shoe mount adapter connector on the bottom

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

HDRiG Handheld Stabilizer is a lightweight stabilizing system used by camera operators who need an ultra-portable camera stabilizer solution.

Product Highlights • For Powering Video Devices, Monitors, Lights • D-Tap to Locking 2.5mm DC Barrel • 12V DC Out • Barrel Lock Prevents Disconnections • Straight Cable, Full 19.68" Length Product Description Used with a D-Tap battery or power source, this straight D-tap to locking DC 2.5mm right-angle cable 12V output cord powers accessories with a 2.5mm or 2.1mm DC barrel connector, such as Small HD 702 touch, Atomos Ninja V, Atomos Shogun NINJA Inferno, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. The power cable provides a D-Tap connector on one end and 2.5mm DC barrel connector on the other. The barrel end features a locking connector to help prevent accidental disconnections.   Net Weight: 41 g   Package Included: 1 x D-Tap to Locking DC 2.5mm Right-Angle Cable 12V Output Power Cord (19.68")

This Monopod with a Gimbal Ballhead works with DSLR Camera, Camcorder.