HDRiG Professional Camera Cage For Blackmagic Pocket 4k Camera

This is Blackmagic Pocket Camera 4K cage kit with left wooden handle.

The extension support is especially designed for BlackMagic Micro Converter UpdownCross HD.

13" RGB LED ring light with three phone clips for outdoor photo light, makeup, live video, studio light, indoor fill light, advertising photography, etc.

Flexible and adjustable half cage for Nikon / Canon / Sony / Panasionc Camera.

It provides an array of 1/4"-20 and 3/8"-16 threaded holes alongside unthreaded mounting groove slots on either end for you to add more accessories at will.

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

Product Highlights   • A combination of a cheeseplate and a power convert outlet • 15mm rod clamp at the end of the cheeseplate • Power converts from D-tap male to 4-port female • Max work current: 10A in total • Coiled spring cable can be stretched to max 120cm • Works great for external monitor/on-camera light/wireless receiver • Compatible with Gold & V-mount camera battery  Product Description  • The cheeseplate can be attach onto a 15mm rod system, it’s used as a bridge for the power convert wire and outlet to connect the power splitter and the camera.     • The power tap receptacle is perfect for powering multiple wireless receivers, external monitors, LED lights from a V-mount camera battery. You can expand any power tap to accommodate up to four separation with the splitter adapter.    Net Weight: 166.2 g Package Included: 1 x Cheeseplate With 15mm Rod Clamp 1 x D-tap Male to 4-Port D-tap Female Power Wire & Outlet   2 x Thread Screw

70mm Long Quick Release Clamp compatible for AS standard QR plate, including for Arca Swiss, RRS, Kirk, Wimberley, Markins, Benro, Sirui, etc.