HDRiG Padded Shoulder Neck Strap For DSLR Camera / Monitor Cage Kit

The Monitor Cage features allowing two monitors to be installed at the same time, it is perfect fit for 5" and 7" LCD monitor.

This microphone screw comes with 1/4"-20 female to 5/8"-27 male thread that connects a microphone holder clip to an accessory with 1/4"-20 male connector.

Product Highlights  • Pair of Locking Levers • M4 Screw, 18mm Thread Length • Spring-Loaded Design • Aluminum Alloy & Stainless Steel Construction   Product Description In a pack of two, these assembly knobs feature an M4 screw that measures 0.7" long and has a spring-loaded handle that enables tightening or loosening the screw, even when full rotation is not possible, such as when accessories are in the way. They can be used to lock devices featuring M4 threaded holes. Net Weight: 12 g Package Included: 2 x Tiny M4 Thumbscrew Assembly Knob

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

Crab Clamp Bracket with Ball Head Mount Cell Phone Clip (Black T-handle)

Product Highlights • Model: WY-F01B  • For BlackMagic Pocket Cinema Camera 4K 6K  • Comes with 1/4" thread screw & hot shoe mount • Power switch and indicator light included • Double Outputs: 1x DC 5.5*2.5mm 12V/2A output; 1x DC 5.5*2.1mm 8V/3A output / input;   Product Description • Use one Sony NP-F970/ 770 series batteries to power variety of devices like DSLR, BMCC camera and monitor at the same time. The product converts output into different voltage and DC interfaces. Power 2 devices at the same time up to 24W. 8V/3A interface fits most DSLR 7.4V-9V dummy battery and DC coupler.   • On/Off Switch: I= On, O=Off. You can turn switch to be O, NP-F battery will stop power output, no need to remove battery from plate. • With 1/4'' mounting screw to cage. A coiled cable with DC 5.5*2.5mm barrel on both ends. You can use the cable to power monitor or BMPCC camera. • Plate mount material: shell ABS + metal aluminum plate + metal copper gold plated pin. Net Weight: 103.3 g   Package Included:  1 x Sony NP-F970 Battery Plate Adapter With 1/4" Thumbscrew  1 x 1/4"-20  Hot Shoe Screw 1 x DC 2.5 Cable  1 x User Manual

Works for Any pipe or bar that s up to 1.5 Inches in Diameter. You can use it on Ring light tripod stand.

Z-SHAPED TILT HEAD helps to adjust shooting angles you may need for photography.