HDRiG Nikon EN-EL14 Dummy Battery to 2.1mm DC Cable

Description

• For Select Nikon camera

• Enables the Use of V-Mount Batteries

• Accepts 7.4-8.4V Input Power

• 5.5/2.1mm Connector

This EN-EL14 Dummy Battery can be used to power Nikon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.1mm right-angle DC plug.

Compatible with:

Nikon Df, D5600, D5500, D5300, D5200, D5100, D3500, D3400, D3300, D3200, D3100, etc.

Packing List

1* EN-EL14 Dummy Battery

Note: The power supply voltage must be 7.2-8.4V.

1. Keep the camera power off.

2. Open the door of the battery cabin, insert the dummy adapter in the cabin. The connector on dummy adapter should match the same direction of the battery cabin.

3. Sort out the cable from the small holes(every camera has this hole near the battery cabin) then lock the cabin door.

4. Connect to the power device. HDRiG provides the dummy battery with 5.5mm/2.1mm DC barrels, so it can use with the V mount/Gold mount Power Supply Splitter. You also can connect it to the camera monitor DC Output then with the help of dummy battery the battery on the monitor can power monitor itself as well as the camera.