HDRiG High Speed 8K Full HDMI 2.1 Cable (2m)

The HDMI 2.1 Cable (3m long) supports 8K video @ 60Hz, 4K video @ 120Hz, 2K video @ 144Hz, 48 Gbps, dynamic HDR,  eARC, providing Ultra HD video and audio transmission experience and 3D visual effects,  plug and play.

Product Description • Cable type: HDMI, micro HDMI • Connector gender: male to male  • Cable length: 100cm • Cable material: copper  • Please note: Micro-HDMI to HDMI adapter cable, please make sure that your host has a Micro-HDMI port before you buy it. Net Weight: 32 g   Package Included: 1*  1.4V Micro HDMI To HDMI Cable Male To Male Adapter For HDTV (100mm Long)

Product Description • Cable type: HDMI, Mini-HDMI (type C)  • Connector gender: male to male  • Cable length: 100cm • Cable material: copper  • Please note: Mini-HDMI (Type C) to HDMI adapter cable, please make sure that your host has a Mini-HDMI port before you buy it. Net Weight: 48.7 g   Package Included: 1* Mini HDMI To HDMI Cable Male To Male Adapter For HDTV (100mm Long)

Product Highlights • For Audio Syncing On The Go • BNC to 0B 5-Pin Push-pull Connector • Lenght: 1m   Product Description • The BNC to 0B 5Pin Timecode Cable is a time code input cable for use with any time code equipped devices which uses a 5-pin push-pull connector for its time code input. The input to this cable is a standard BNC connector which can be fed time code from any device that has a BNC time code output. This cable compatible with Alexa Mini, Sound Devices 633 and other devices. . Net Weight: 66.3 g   Package Included: 1 x  BNC to 5Pin Timecode Cable

Product Highlights • EN-EL14 (EP-5A) dummy battery for Nikon cameras  • Both 2.1mm female & male plug DC cables available • Plug A: DC4017 female;  Plug B: DC5521 male;  • Enables the use of V-mount batteries • Maximum coiled cable length: 1.25m • Maximum straight cable length: 0.9m   Product Description • This EN-EL14 (EP-5A) Dummy Battery can be used to power Nikon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Nikon D3100 / D3100 / D3200/ D3300 / D3400 / D3500 / D5100 / D5200 / D5300 / D5400 / D5500 / D5600 / P7100 / P7700 / P7800. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with 2.1mm female and male plug DC cables. Net Weight: 74.8 g   Package Included: 2 x  Nikon EN-EL14 (EP-5A) Dummy Battery 1 x 2.1mm Female Plug DC Straight Cable 1 x 2.1mm Male Plug DC Coiled Cable

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

Product Highlights • Handhold Three 5 & 7" Director's Monitors • Vertical Mounting • Adjust Height via 15mm Support Rods (20cm Long) • Adjustable Carbon Fiber Handgrips • Mini Top & Base Plates with Central Slot • Multiple 1/4"-20 Threads • Anodized Aluminum Alloy & Carbon Fiber Product Description   The Triple Director’s Monitor Cage is a modular support that provides a comfortable way to carry three 5 to 7" LCD on-camera monitors in a vertical orientation. This cage's triple design enables your director or DP to view three camera feeds side by side. It is based on a universal plate system that mounts your monitors using 1/4"-20 mounting points on the side of your monitors. It also features 1/4"-20 threads for supporting a variety of accessories. Two horizontally adjustable carbon fiber handgrips attach to the vertical 15mm side supports. Net Weight: 860 g  Package Included:  1 x Triple Director’s Monitor Cage  1 x Allen Wrench

This handle widely used for various kinds of camera cage (mounted on top or side), or directly install this handle onto the top of the camera.