HDRIG 15mm Single Rod Clamp Cheese Handle

The handgrip can be mounted via the integrated 15mm LWS rod clamp.

This Top Cheese Handle features  a shoe mount and a 15mm rod clamp and it will allow you to do various DIY configurations with your camera cage rig.

The top rubber handle can be directly attached to the camera cage via two 1/4"-20 fixing screws for shooting at different angles freely.

The Carbon Fiber Made Handgrip Pair features a column diameter of 30mm and 158mm in length and it can be used for HDRiG monitor cage.  

The HDRiG Handgrip for DSLR shoulder mount rig is an adjustable dual cheese handle system, it features ARRI rosettes M6 connection mount.

  Host Connector USB C Ports USB3.0+USB2.0+RJ45+SD Card Slot+MicroSD Slot USB3.0 5Gbps RJ45 100Mbps Features: Network interface: supports 100M Ethernet Interface type: RJ45 USB interface: 1 x USB3.0 1 x USB2.0 Card Slot: 1 x SD Card Slot 1x MicroSD Slot Cable length: 135mm (including connector) Dimensions: 72 x 45 x 15mm Material: aluminum shell   Description: 1.[High Speed Network Connection]-5 in 1 USB-C to ethernet provides faster data transfe. Obtain stable connection speeds up to 5 Gbps, downward compatible with 100Mbps/10Mbps 2.[Plug & Play]-Simple installation with no software/drivers or external power required. On the docking station, there is an LED indicator to show the connection status of your devices. 3.[Compact & Friendly Design]-Compact and lightweight, with a user-friendly non-slip design for easier plug and unplug. Premium aluminum housing for better heat insulation. Fits snugly with the USB-C ports on your devices, better signal transfer protection. 4.[USB On-The-Go] Expands the capabilities of your OTG-enabled device 5.[Wide Compatibility]-Works with Windows, Mac, Chrome, tablet, phone & more Note: The SD and microSD card readers can not read cards simultaneously. Net Weight: 50 g Package Included: 1 x 5-In-1 USB Type-C Hub

Product Highlight • 12G BNC male to female SDI protector isolation cable  • Passing Through 2K • Anti-burn protector cable for ARRI Mini / RED Komodo • Prevents current breakdown SDI protection device • Cable length : 28cm   Product Description • Function: We installed a circuit board chip in the shell to protect the SDI output. By isolating the current from the BNC male connector to the BNC female connector, the same transmission effect can be achieved through the same frequency. Prevent the current passing through the SDI line from breaking down the machine SDI. Such accidents are very common in ARRI mini and Komodo. Net Weight: 59 g   Package Included: 1 × 12G BNC SDI Protector SDI Anti-current Isolation Cable For ARRI Mini / RED Komodo Cameras (Red)

It fits standard 1/4" threaded hole and  3/8" male thread.