• f
  • t
  • instagram
  • y
  • p
  • tumblr
0
Products
  • Splitter Cable
    HDRiG Male D-Tap to 2-Port Female D-Tap and USB-C Splitter Cable (21 to 59")
    Product Highlights • Right-Angle Male D-Tap Connecto • 2 x Female D-Tap Ports • USB-C PD Port • 1 x 1/4"-20 Mounting Screw • 21 to 59" Coiled Length   Product Description  Use this Male D-Tap to 2-Port Female D-Tap and USB-C Splitter Cable to power your camera accessories on set with a single V-mount or Gold mount battery. The cable features a right-angle male D-Tap connector on one end and two female D-Tap outputs on the other end that can be secured to a cage or mounting plate via a 1/4"-20 screw. A USB-C port on the output block supports PD sources 5 to 12V with a maximum 36W output. The coiled cable has a total length range of 21 to 59" for efficient cable runs. Net Weight: 110 g Package Included: 1 x Male D-Tap to 2-Port Female D-Tap and USB-C Splitter Cable

    $27.60 add to cart

    read moreRead More
  • Quick Release Plate
    HDRiG 200PL-14 RC2 Quick Release Plate Kit with 15mm LWS Rod Clamp
    Product Highlights: • Manfrotto 323 RC2 system • 3/8"-16 Base Mount with 1/4"-20 Bushing • Attaches to Any Tripod or Support • Swiveling 15mm LWS Rod Bracket • Quick Attachment and Release • Aluminum Alloy Construction Product Description Add a compact quick release system to your 15mm LWS support system with this 200PL-14 RC2 Quick Release Plate Kit with 15mm LWS Rod Clamp. The included 15mm dual-rod clamp attaches to the 200PL-14 quick release plate to mount the assembly onto separately available standard 15mm LWS rods on your camera rig. The 323 adapter allows quick attaching and detaching of the connected device from the tripod, and the rotating 15mm rod clamp allows you to tilt the position of the 15mm rod system. The base adapter features a 3/8"-16 socket and includes a 3/8"-16 to 1/4"-20 reducer bushing for mounting on virtually any tripod or support. Net Weight: 243 g Package included: 1 x 200PL-14 RC2 Quick Release Plate with 15mm LWS Rod Clamp 1 x Allen Wrench

    $36.50 add to cart

    read moreRead More
  • V Lock Mount
    HDRiG Micro V-Mount Battery Plate with 15mm LWS Rod Clamp (D-Tap Outputs)
    Product Highlights • For Standard & Micro V-Mount Batteries • 2 x 14.8V D-Tap Power Outputs • Swiveling 15mm LWS Rod Bracket • Cheese-Style Mounting Plate • 1/4"-20 Threads, Anti-Twist Divots/Slots • Aluminum & ABS Plastic Construction Product Description Power your camera and a variety of accessories from a high-capacity V-mount battery with this Micro V-Mount Battery Plate with 15mm LWS Rod Clamp. The compact battery plate provides two 14.8V D-tap outputs around the sides of the plate, as well as a release button for efficient detaching of your connected V-mount battery. The battery plate mounts onto a cheese plate with numerous 1/4"-20 mounting holes, and the included 15mm rod clamp attaches to the cheese plate to mount the assembly onto separately available standard 15mm LWS rods on your camera rig. The rotating 15mm LWS dual-rod clamp allows you to tilt the position of the assembly. Several 1/4"-20 threaded holes have anti-twist slots that allow you to mount accessories with anti-twist pins. Net Weight: 283 g Package Included: 1 x Micro V-Mount Battery Plate with 15mm LWS Rod Clamp

    $62.90 add to cart

    read moreRead More
  • Dovetail Bridge Plate
    HDRiG 8" ARRI-Standard Dovetail Plate and 15mm LWS Baseplate
    Product Highlights  • 8" ARRI-Standard Bottom Dovetail • Dovetail Bridge Plate • 15mm LWS Rod Support • 1/4"-20 and 3/8"-16 Camera Mounts • 1/4"-20 and 3/8"-16 Accessory Threads • Red Locking Switch, Safety Pin, Stopper Screw • Aluminum Alloy Construction Product Description Integrate this 8" ARRI-Standard Dovetail Plate and 15mm LWS Baseplate into your rig configuration and provide additional adjustment length to properly balance your camera. The dovetail plate features a safety pin and stopper screw for security, and it incorporates 1/4"-20 and 3/8"-16 threaded holes to integrate accessories to the front or rear of your camera, as well as attach the dovetail to a tripod quick release plate or other support. The bridge plate offers dual 15mm rod clamps for rod-mounted configurations as well as a red locking switch that enables an instant one-key lock or release of the bottom dovetail, and it also provides a section with multiple 1/4"-20 accessory mounting threads. The dovetail is weight-reducing cutout designed. The sled slides into the dovetail and offers two camera screws, one 14"-20 and one 3/8"-16 for mounting your camera. Spare camera screws are also included. Net Weight: 486 g      Package Included:          1 x 8" ARRI-Standard Bottom Dovetail 1 x Dovetail Bridge Plate 1 x 1/4"-20 Camera Screw 1 x 3/8"-16 Camera Screw 2 x 1/4"-20 Mounting Screw 1 x Allen Wrench

    $82.60 add to cart

    read moreRead More
  • Bottom Dovetail Plate
    HDRiG 8" ARRI-Standard Bottom Dovetail Plate
    Product Highlights  • For ARRI-Standard Dovetail Baseplate • 8" in Length • 1/4"-20 & 3/8"-16 Mounting Threads • Lightweight Design • Safety Pin, Stopper Screw • Aluminum Alloy Construction Product Description The 8" bottom dovetail, with a weight-reducing cutout design, can be used with an ARRI-standard bridge plate for balancing your camera rig. Constructed of anodized aluminum, this dovetail has built-in 3/8"-16 and 1/4"-20 threads for mounting on a tripod quick release plate or other support. The plate also offers a release pin, and a stopper screw for additional security. Net Weight: 160 g      Package Included:          1 x 8" ARRI-Standard Bottom Dovetail

    $0.00 add to cart

    read moreRead More
  • Dovetail Plate
    HDRiG 8" Dovetail Plate and 15mm LWS Baseplate
    Product Highlights  • 8" Bottom Dovetail Plate   • Dovetail Bridge Plate • 15mm LWS Rod Support, ARRI Rosettes • 1/4"-20 and 3/8"-16 Camera Mounts • 1/4"-20 and 3/8"-16 Accessory Threads • Safety Pin, Stopper Screw • Different Size than ARRI-Standard Dovetail • Aluminum Alloy Construction Product Description Integrate this 8" Dovetail Plate and 15mm LWS Baseplate into your rig configuration and provide additional adjustment length to properly balance your camera. The dovetail plate features a safety pin and stopper screw for security, and it incorporates 1/4"-20 and 3/8"-16 threaded holes to integrate accessories to the front or rear of your camera, as well as attach the dovetail to a tripod quick release plate or other support. The bridge plate offers two ARRI rosette mounts for attaching optional handgrips as well as dual 15mm rod clamps for rod-mounted configurations, and it also provides a section with multiple 1/4"-20 accessory mounting threads. The baseplate is made with excess weight cut out to provide a minimalist, lightweight design. The sled slides into the dovetail and offers two camera screws, one 14"-20 and one 3/8"-16 for mounting your camera. Note: This dovetail is not ARRI-standard. Net Weight: 413 g      Package Included:          1 x 8"  Dovetail Plate 1 x Dovetail Bridge Plate 1 x Allen Wrench

    $0.00 add to cart

    read moreRead More
  • Bottom Dovetail
    HDRiG 8" Bottom Dovetail Plate
    Product Highlights  • Different Size than ARRI-Standard Dovetail • For Compatible CAMVATE Dovetail Baseplates • 8" in Length • 1/4"-20 & 3/8"-16 Mounting Threads • Lightweight Design • Safety Pin, Stopper Screw • Aluminum Alloy Build Product Description The 8" bottom dovetail, with a weight-reducing cutout design, works with select HDRiG dovetail bridge plates for balancing your camera rig. Constructed of anodized aluminum, this dovetail has built-in 3/8"-16 and 1/4"-20 threads for mounting on a tripod quick release plate or other support. The plate also offers a release pin, and a stopper screw for additional security. Note: This plate doesn't work with ARRI-standard dovetail bridge plates. Net Weight: 140 g      Package Included:          1 x 8"  Bottom Dovetail

    $33.90 add to cart

    read moreRead More
  • D-Tap
    HDRiG D-Tap P-Tap to 5V USB Adapter Connector
    Product Highlights • Handy D-Tap to 5V USB Connector • Power Input (Standard Male D-Tap): 11~17V 10A (Max) • Power Output (Standard Female D-Tap): 11~17V 10A (Max) • Power Output (USB): 5V 1.6A (MAX) • Compatible with Gold & V-mount Camera Battery • Material: ABS Plastic & Metal  Product Description  The gadget is a must for field shooting, works great with Anton ports, and allows you to have USB port closely at hand. It is a awesome way to charge the phone and other USB devices. Net Weight: 23g Package Included: 1 X D-Tap to 5V USB Adapter

    $15.00 add to cart

    read moreRead More
  • Power Splitter
    HDRiG Male D-Tap B Type Power Tap to 4-Port Female D-Tap P-Tap Hub Adapter Splitter
    Product Highlights • D-Tap Male Connector to 4-port Female Connector • Max Work Current: 10A in Total • Coiled Spring Cable Can be Stretched to Max 120cm • Works Great for External Monitor/on-camera Light/Wireless Receiver • Compatible with Gold & V-mount Camera Battery Product Description  The power tap receptacle is perfect for powering multiple wireless receivers, external monitors, LED lights from a V-mount camera battery. You can expand any power tap to accommodate up to four separation with the splitter adapter. Net Weight: 96g Package Included: 1 X D-Tap Male to 4-Port D-Tap Female Cable Splitter (Note: The coiled spring cable can't shrink if fully stretched.)

    $25.00 add to cart

    read moreRead More
  • Power Convert Outlet
    HDRiG 15mm Rod Clamp Cheeseplate & Power Convert Outlet
    Product Highlights   • A combination of a cheeseplate and a power convert outlet • 15mm rod clamp at the end of the cheeseplate • Power converts from D-tap male to 4-port female • Max work current: 10A in total • Coiled spring cable can be stretched to max 120cm • Works great for external monitor/on-camera light/wireless receiver • Compatible with Gold & V-mount camera battery  Product Description  • The cheeseplate can be attach onto a 15mm rod system, it’s used as a bridge for the power convert wire and outlet to connect the power splitter and the camera.     • The power tap receptacle is perfect for powering multiple wireless receivers, external monitors, LED lights from a V-mount camera battery. You can expand any power tap to accommodate up to four separation with the splitter adapter.    Net Weight: 166.2 g Package Included: 1 x Cheeseplate With 15mm Rod Clamp 1 x D-tap Male to 4-Port D-tap Female Power Wire & Outlet   2 x Thread Screw

    $35.00 add to cart

    read moreRead More
  • BNC Cable
    HDRiG BNC To 0B 5Pin Push-Pull Connector Timecode Cable For Alexa Mini
    Product Highlights • For Audio Syncing On The Go • BNC to 0B 5-Pin Push-pull Connector • Lenght: 1m   Product Description • The BNC to 0B 5Pin Timecode Cable is a time code input cable for use with any time code equipped devices which uses a 5-pin push-pull connector for its time code input. The input to this cable is a standard BNC connector which can be fed time code from any device that has a BNC time code output. This cable compatible with Alexa Mini, Sound Devices 633 and other devices. . Net Weight: 66.3 g   Package Included: 1 x  BNC to 5Pin Timecode Cable

    $26.00 add to cart

    read moreRead More
  • HDMI Cable
    HDRiG Mini HDMI To HDMI Cable Male To Male Adapter For HDTV (100cm Long)
    Product Description • Cable type: HDMI, Mini-HDMI (type C)  • Connector gender: male to male  • Cable length: 100cm • Cable material: copper  • Please note: Mini-HDMI (Type C) to HDMI adapter cable, please make sure that your host has a Mini-HDMI port before you buy it. Net Weight: 48.7 g   Package Included: 1* Mini HDMI To HDMI Cable Male To Male Adapter For HDTV (100mm Long)

    $6.89 add to cart

    read moreRead More
first page 1 ... 4 5 6 7 8 ... 77 last page
[  a total of  77  pages]
leave a message

leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

Contact

top