HDRiG Simple Kit For Blackmagic Pocket Camera 4K 6K

The extension support is especially designed for BlackMagic Micro Converter UpdownCross HD.

The Rubber Handgrip comewith a GoPro monopod mount that allows you to hold up your Gopro camera onto the handle for flexible shooting.   

Product Highlights • Right-Angle Male D-Tap Connecto • 2 x Female D-Tap Ports • USB-C PD Port • 1 x 1/4"-20 Mounting Screw • 21 to 59" Coiled Length   Product Description  Use this Male D-Tap to 2-Port Female D-Tap and USB-C Splitter Cable to power your camera accessories on set with a single V-mount or Gold mount battery. The cable features a right-angle male D-Tap connector on one end and two female D-Tap outputs on the other end that can be secured to a cage or mounting plate via a 1/4"-20 screw. A USB-C port on the output block supports PD sources 5 to 12V with a maximum 36W output. The coiled cable has a total length range of 21 to 59" for efficient cable runs. Net Weight: 110 g Package Included: 1 x Male D-Tap to 2-Port Female D-Tap and USB-C Splitter Cable

Product Highlights • On-Camera Monitor Mounting Slot • 1/4"-20 Threaded Mounting Holes • Two Pass-Through Holes Spaced 36mm Apart • Anti-Slip Rubber Pads • Aluminum Alloy Construction Product Description Use this versatile Top / Bottom Plate with Mounting Slot on top of or below your monitor rig. The anti-slip rubber pads help keep your rig or mounted accessories from twisting, and the mounting slot helps to find your balance point. The 1/4"-20 threaded holes allows you to mount a variety of accessories. The two pass-through holes on the front are spaced 36mm apart, providing additional points for attaching the plate to your cage. Net Weight: 44 g Package Included: 1 x Universal Top / Bottom Plate 2 x 1/4"-20 screw 1 x Allen Wrench

Product Highlights • D-tap to 3P ×4 female port & USB splitter cable • Used to expand the D-tap interface • Plug A: D-tap male connector   Plug B: 4 port D-tap female connector   Plug C: USB 5V/2.1A • Coiled spring cable can be stretched to max 100cm • Small in size, lightweight and easy to carry about • For V mount Gold mount battery /monitor /LED video light /BMPCC 4K 6K /ARRI RED Camera /Smartphone Product Description  • This D-tap splitter cable is used to expand the D-tap interface of your photographic power and the Anton Bauer/ V-mount battery.  You can expand any Power Tap to accommodate up to four separate, perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. • Designed with 3 x4 Port, the D-tap can be quickly plugged into the socket even eyes closed, which can prevent the power cord from blocking the device. • 35cm to 100cm coiled cable, max current: 10A. USB for your smartphone, and other USB devices. • On the back are 2x 1/4" screw holes, convenient to use with other accessories. Net Weight: 111.1 g Package Included: 1 x D-tap To 3P ×4 Female Port & USB Splitter Cable With Power Switch  (Note: The coiled spring cable can't shrink if fully stretched.)

Product Highlights  • Attaches to Left or Right Side of the Gimbal • Quick Rlease NATO Mount • Integrated 15mm Diameter Rod • 1/4"-20 Accessory Threads • Anti-Twist 3/8"-16 ARRI Accessory Mounts • Integrated NATO Rail Connection • Aluminum Alloy Construction Product Description This extension arm can attach to the NATO rail on the side of the DJI RS 2, RSC 2, RS 3 & RS 3 Pro via a built-in NATO clamp, and provides multiple mounting options for expanding your gimbal on either side, in a quick release machanism. It allows for attachements of multiple accessories such as a monitor, articulating arm, rod mount, and NATO compatible accesorry via 1/4"-20 and 3/8"-16 threads, integrated 15mm rod and NATO rail connection.   Net Weight: 89 g Package Included:  1 x NATO Extension Mount for DJI RS 2, RSC 2, RS 3 & RS 3 Pro

The specification of threaded part is M4*18mm with adjustable design.

The Detachable Light Stand Holder Accessories comes with a 3/8"-16 Female to 1/4"-20 Female Light Stand Head Adapter.