Product Highlights • Timecode cable for ARRI Mini sound devices • Plug A: BNC connector (right angle) • Plug B: 0B 5 pin male (right angle) • Cable length: 53cm   Product Description • This cable is SMPTE Time Code in, it's compatible with ARRI Mini camera.  • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.     Net Weight: 38 g   Package Included: 1 x BNC To 0B 5 Pin Male Right Angle Timecode Cable For ARRI Mini Camera

Product Highlights • Cable type: type C • Cable length: 2m • Connector: USB type C 3.1 Gen 2, C to C • Built-in E-Marker chip for 100W PD fast charge  • Material: tinned copper, Al-Mylar, nylon braided   Product Description • Compatible with USB C electronic devices such as laptop /TNT workstation /Nintendo Switch /mobilephone /hard drive /power bank /power charger /camera / automobile • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.     Net Weight: 73.1 g   Package Included: 1 x USB Type C 3.1 Gen 2 E-Marker Cable 100W PD Fast Charge Nylon Braided 

Product Highlights • D-Tap male connector to 4-port female connector • Max Work Current: 10A in Total • Cable length:58cm • Works great for external monitor/on-camera light/wireless receiver • Compatible with Gold & V-mount camera battery Product Description  The power tap receptacle is perfect for powering multiple wireless receivers, external monitors, LED lights from a V-mount camerabattery. You can expand any power tap to accommodate up to four separation with the splitter adapter. Net Weight: 58.3 g Package Included: 1 x Male D-Tap B Type Power Tap to 4-Port Female D-Tap P-Tap Hub Splitter Adapter Power Cable

Product Highlights • D-Tap male connector to 4-port female connector • 4× D-tap female port / 5V/2.1A USB jack / 1× 8V DC 2.1mm Barrel / 1×12V DC 2.5mm Barrel • Works great for external monitor/on-camera light/wireless receiver • Coiled spring cable can be stretched to max 75cm • Small in size, lightweight and easy to carry about • Compatible with V-mount camera battery Product Description  • There are four D-Tap female connectors, which is very suitable for providing power to multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. In addition to the D-Tap female port, there is also a 5V/2.1A USB jack and two 8V and 12V DC port to meet more charging needs. • There are two 1/4 inch screw holes on the back, which can be installed and fixed on the photographic equipment • With a switch button, you can directly turn it on or off without plugging and unplugging the connector, and there is an indicator light, which shows green when working.  • Safe to Use: standard specifications; Safety is guaranteed. With CE, FCC, RoHS certification marks Net Weight: 117.7 g Package Included: 1 x Multifunctional D-Tap Male To 4-Port D-Tap Female Coiled Splitter Cable With Switch Button / USB Port (Note: The coiled spring cable can't shrink if fully stretched.)

Product Highlights • D-tap to 3P ×4 female port & USB splitter cable • Used to expand the D-tap interface • Plug A: D-tap male connector   Plug B: 4 port D-tap female connector   Plug C: USB 5V/2.1A • Coiled spring cable can be stretched to max 100cm • Small in size, lightweight and easy to carry about • For V mount Gold mount battery /monitor /LED video light /BMPCC 4K 6K /ARRI RED Camera /Smartphone Product Description  • This D-tap splitter cable is used to expand the D-tap interface of your photographic power and the Anton Bauer/ V-mount battery.  You can expand any Power Tap to accommodate up to four separate, perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. • Designed with 3 x4 Port, the D-tap can be quickly plugged into the socket even eyes closed, which can prevent the power cord from blocking the device. • 35cm to 100cm coiled cable, max current: 10A. USB for your smartphone, and other USB devices. • On the back are 2x 1/4" screw holes, convenient to use with other accessories. Net Weight: 111.1 g Package Included: 1 x D-tap To 3P ×4 Female Port & USB Splitter Cable With Power Switch  (Note: The coiled spring cable can't shrink if fully stretched.)

Product Highlights •LP-E8 (DR-E8) dummy battery for Canon cameras  • Enables the use of V-mount batteries • 2.1mm DC connector available • Cable length: 250mm    Product Description • This LP-E8 (DR-E8) Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS 550D / 600D / 650D/ 700D / Kiss x7i / Kiss x6 / Kiss x5 / Kiss x4. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.1mm DC plug.  Net Weight: 26.7 g   Package Included: 1 x Canon LP-E8 (DR-E8) Dummy Battery To 2.1mm DC Cable 

Product Highlights •LP-E10 (DR-E10) dummy battery for Canon cameras  • Enables the use of V-mount batteries • 2.1mm DC connector available • Cable length: 270mm   Product Description • This LP-E10 (DR-E10) Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS 1100D / 1200D / 1300D/ 1500D / 3000D. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.1mm DC plug. Net Weight: 23.8 g   Package Included: 1 x Canon LP-E10 (DR-E10) Dummy Battery To 2.1mm DC Cable

Product Highlights •LP-E12 (DR-E12) dummy battery for Canon cameras  • Enables the use of V-mount batteries • 2.1mm DC connector available • Cable length: 275mm   Product Description • This LP-E12 (DR-E12) Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS M / M2 / M10/ M50 / M100 / M200. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.1mm DC plug.   Net Weight: 22.7 g   Package Included: 1 x Canon LP-E12 (DR-E12) Dummy Battery To 2.1mm DC Cable

Product Highlights • LP-E6 (DR-E6) dummy battery for Canon cameras  • Both 2.1mm female & male plug DC cable available • Enables the use of V-mount batteries • Maximum coiled cable length: 1.3m • Maximum straight cable length: 0.9m Product Description • This LP-E6 (DR-E6) Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS 5D2 / 5D3 / 5D4/ 6D / 6D2 / 60D / 7D / 7D2 / 70D / 80D / 90D / 5DSR / R / R5 / R6. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with 2.1mm female & male plug DC cables.  Net Weight: 84.3 g   Package Included: 2 x Canon LP-E6 (DR-E6) Dummy Battery  1 x 2.1mm Female Plug DC Straight Cable 1 x 2.1mm Male Plug DC Coiled Cable

Product Highlights •LP-E17 (DR-E18) dummy battery for Canon cameras  • Both 2.1mm female & male plug DC cables available • Enables the use of V-mount batteries • Maximum coiled cable length: 1.3m • Maximum straight cable length: 0.925m   Product Description • This LP-E17 (DR-E18) Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS M / M2 / M10/ M50 / M100 / M200. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with 2.1mm female and male plug DC cables. Net Weight: 74.1 g   Package Included: 2 x Canon LP-E17 (DR-E18) Dummy Battery To 1 x 2.1mm Female Plug DC Straight Cable 1 x 2.1mm Male Plug DC Coiled Cable

Product Highlights • LP-E17 (DR-E17) dummy battery for Canon cameras  • Enables the use of V-mount batteries • 2.1mm DC connector available  • Cable length: 275mm   Product Description • This LP-E17 (DR-E17)Dummy Battery can be used to power Canon cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Canon EOS M3 / M5 / M6. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.1mm DC plug. Net Weight: 26.8 g   Package Included: 1 x Canon LP-E17 (DR-E17) Dummy Battery To 2.1mm DC Cable 

Product Highlights • DMW-BLF19 (DCC12) dummy battery for Panasonic cameras  • Plug A: DC4017 female;  Plug B: DC5521 male;  • Enables the use of V-mount batteries • Maximum coiled cable length: 1.25m • Maximum straight cable length: 300mm   Product Description • This Panasonic DMW-BLF19 (DCC12) Dummy Battery can be used to power Panasonic cameras with a V-mount battery. It enables us to use the longer-lasting V-mount batteries instead of the smaller batteries. • Compatible with: Panasonic DMC-GH3 / DMC-GH4 / DMC-GH5/ DMC-GH5S. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with 2.1mm male and female DC plugs. Net Weight: 71.2 g   Package Included: 2 x Panasonic Double DMW-BLF19 (DCC12) Dummy Battery 1 x 2.1mm Female Plug DC Straight Cable 1 x 2.1mm Male Plug DC Coiled Cable